Answers are grounded in this paper and cite their sources.
Epoxy resins are brittle and wear rapidly when sliding against steel. This study examines the dry sliding wear and friction of hybrid composites in which short, untreated ultra-high-molecular-weight polyethylene (UHMWPE) fibre (12 mm long, 1–5 phr) was added to an LY556/HY951 epoxy matrix containing 1 phr graphene nanoplatelets (GNP). The five hybrids (EGU1–EGU5) were prepared by liquid-phase processing (sequential mechanical stirring and bath sonication, casting and vacuum degassing) and tested on a pin-on-disc tribometer against EN31 steel. Sliding time (5, 10 and 15 min), normal load (10, 20 and 30 N) and disc speed (500, 600 and 700 rpm) were arranged in a Taguchi L9 orthogonal array, and the 45 tests were analysed by main-effects analysis of variance (ANOVA). Over the nine conditions, the mean wear depth decreased from 626.7 ± 491.0 µm for EGU1 to 260.6 ± 128.9 µm for EGU5 (−58.4%), and the mean coefficient of friction from 0.501 ± 0.158 to 0.250 ± 0.096 (−50.1%), and the mean specific wear rate from 5.44 × 10−4 to 2.86 × 10−4 mm3 N−1 m−1 (−47%). Normal load (24.2% contribution, p = 0.0002), fibre content (17.0%, p = 0.012) and sliding time (16.1%, p = 0.0025) had significant effects on wear, whereas sliding speed did not (p = 0.15), and fibre content was the only significant factor for friction (31.4%, p = 0.0086). The fibres were most effective at high load, with EGU5 wearing 74.7% less than EGU1 at 30 N, compared with 42.0% less at 10 N. Vickers microhardness rose from 23.2 to 35.3 HV between EGU1 and EGU5. Scanning electron microscopy of the worn pins showed that the wear mechanism changed from fatigue-assisted delamination in EGU1 to mild abrasion with a thin smeared layer in EGU5. Within the conditions tested, 4–5 phr UHMWPE fibre gave the lowest wear and friction.
No takes yet. Share an insight, caveat, or question.
R et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: