Answers are grounded in this paper and cite their sources.
Weak clays usually don’t have enough strength to meet the requirements of pavements, embankments, or building foundations. This paper investigates if reverse osmosis (RO) filters for households and businesses produce by-products, recycled polypropylene granules (PG) and spent activated carbon granules (ACG), which can be used to stabilize weak, low-plasticity clay (CL). Fourteen mixtures were created using different combinations and proportions of PG (0.5 to 1.5%), ACG (5 to 15%) and a fixed amount of 4% lime with the clay. All mixtures were tested by standard Proctor compaction, and unconfined compressive strength (UCS) tests. To see if any chemical changes occurred between the original and strongest clay mixture, XRD and SEM were used. PG only mixtures showed 0.5% PG yielded the maximum density at 13g/cm³ compared to 1.8g/cm³ and had the least amount of moisture required at 10.53% against 1.6%. Within the lime treated category, ACG mixtures gained the most with 5% ACG and 4% lime at a maximum UCS of 770.81 kN/m², which is 21.0% better than lime alone and 543.9% more than the untreated clay. There was no improvement from adding PG in the presence of lime. The denser packing, along with strong inter-particle contact in addition to the bond lime created, was the reason for this. However, X-ray Diffraction did not reveal the production of new materials. There was only one test performed on each sample; thus, closely related data may require testing of more samples. At this stage, recycled materials appear to have good potential as low-cost stabilizing materials.
No takes yet. Share an insight, caveat, or question.
Jassal et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: