Answers are grounded in this paper and cite their sources.
This paper presents the design of a semi-humanoid welcome robot that greets people by voice, shows what its camera sees and stores the captured images for later reference. A Raspberry Pi 4 Model B is the main processing unit. It handles the microphone and speaker for voice greetings and coordinates the other parts of the robot. An ESP32 microcontroller is the secondary controller. It drives the servo motors for head and hand gestures and the 30 RPM DC motors of the base through an L298N motor driver, while an ESP32-CAM captures images that are shown on a visual display and can be saved. A 12 V, 18 Ah battery supplies the robot, and a buck converter lowers the voltage for the Raspberry Pi and the other electronic parts. An ultrasonic sensor stops the motors when an obstacle comes within 30 cm. The functions and communication links of each processing unit are defined, and the drive, power budget, battery, obstacle limit and servo torque were sized by design calculations. The calculated robot speed is about 0.102 m/s, the estimated load is 37.5 W, and the 216 Wh battery can theoretically run the system for about 5.76 h (about 5.4 h when an assumed 85 % converter efficiency is included). Fault-handling provisions and measures for protecting stored images and personal data are proposed, and a measurement protocol for voice response time, image acquisition, communication latency, movement accuracy and power consumption is given; measured values are not yet reported. The robot is low in cost, modular and easy to extend, and it suits reception desks, laboratories, offices and exhibitions.
No takes yet. Share an insight, caveat, or question.
SM et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: