Answers are grounded in this paper and cite their sources.
This study investigates the quasi-static compressive behavior and specific energy absorption (SEA) of aluminum honeycomb composites hybrid-reinforced with polyurethane foam and carbon fiber tubes, and identifies the optimal filling pattern and filling ratio for lightweight energy-absorbing applications. Quasi-static compression tests were conducted perpendicular to the honeycomb cell axis, and finite element (FE) simulations were performed to validate the experimental results. The results demonstrate that hybrid reinforcement significantly modifies the collapse mechanisms by promoting progressive deformation and enhancing stress transfer between the honeycomb core and the reinforcing fillers. Compared with the unfilled honeycomb (SEA = 4.7 J/g), the hybrid-filled configurations exhibited substantially higher SEA values, with the C12 (40% filling) and C18 (60% filling) configurations achieving 74.3 and 76.8 J/g, respectively. However, increasing the filling ratio from 40% to 60% resulted in only a 3.3% increase in SEA despite a 37% increase in mass, indicating that the C12 configuration provides the optimal balance between energy absorption and weight efficiency. The FE simulations showed reasonable agreement with the experimental force-displacement responses and successfully captured both the deformation modes and the relative ranking of the investigated configurations. These findings demonstrate that hybrid foam-tube reinforcement is an effective strategy for enhancing the specific energy absorption of aluminum honeycomb composites, with the C12 pattern representing the optimal configuration for lightweight energy-absorbing applications.
No takes yet. Share an insight, caveat, or question.
Safdari et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: