Answers are grounded in this paper and cite their sources.
This study explores biodegradable polymer composites made from renewable biomass and mineral fillers, offering a sustainable path for engineering materials. Poly(butylene succinate) (PBS) composites were created by incorporating alkali-treated water hyacinth (WH) and basalt filler (BF) at a fixed 40 wt.% total filler load via twin-screw extrusion and compression molding. The research examines how lignocellulosic and inorganic fillers, both individually and in hybrid combinations, affect the mechanical, thermal, viscoelastic, rheological, surface, and morphological properties of PBS. Adding fillers decreased tensile strength and impact resistance compared to pure PBS due to limited chain mobility, interfacial stress, and filler-induced crack initiation. Nevertheless, notable increases in stiffness were observed, especially in the 60P40 W composite, which achieved a tensile modulus of 832.30 MPa and a flexural modulus of 3182.92 MPa, compared to 222.12 MPa and 637.82 MPa for neat PBS. Basalt-reinforced PBS exhibited higher strength and toughness, with tensile strength of 21.58 MPa, flexural strength of 45.06 MPa, and impact strength of 3.06 kJ/m 2 . The hybrid composite reached the highest Shore D hardness of 72.52, indicating enhanced surface durability. Differential scanning calorimetry (DSC) revealed composition-dependent changes in PBS crystallinity after normalization to the polymer mass fraction. Thermogravimetric analysis (TGA) revealed higher residual mass retention in basalt-containing composites, with 60P40B retaining 38.62 wt.% at 600°C, primarily due to the thermally stable inorganic nature of basalt. Dynamic mechanical analysis (DMA) revealed higher storage modulus and damping for WH-rich composites, with 60P40 W attaining an E′ of 4548.67 MPa and a tan δ of 0.45. Rheological tests showed that water hyacinth significantly increased melt viscosity due to interactions between the filler and the matrix. These PBS/WH/BF composites demonstrate potential for use in non-load-bearing automotive interior components, protective casings, and vibration-damping panels, where stiffness and surface hardness are prioritized. However, their practical suitability requires further evaluation of biodegradation behavior, long-term durability, moisture resistance, creep, and thermal aging.
No takes yet. Share an insight, caveat, or question.
Sumrith et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: