Answers are grounded in this paper and cite their sources.
For several classes of crystalline silicon (c-Si) photovoltaic (PV) cells, such as silicon heterojunction (SHJ) or tunnel oxide passivated contact (TOPCon), an obstacle to producing them at the terawatt scale is the use of silver in their contacts. One promising alternative is copper, which is often implemented in combination with a barrier material to prevent degradation via copper diffusion. But because there may be cases where the barrier is locally absent between copper and Si (caused by fabrication imperfections such as dust), it may be desirable to design silicon-based cell layers that are themselves resistant to copper-induced degradation. Here, we study how the crystallinity of n-type polysilicon layers (like those used at the rear of a TOPCon cell) affects their susceptibility to copper-induced degradation. We study simple, symmetric samples consisting of sputtered copper thin films on flat n-type polysilicon / silicon oxide (poly-Si(n) / SiOx) passivating contact stacks. After annealing the samples at 200°C for 30 minutes in nitrogen, the passivation is ruined for samples whose poly-Si crystalline fractions are high, while more amorphous poly-Si(n) show little to no change in passivation. The passivation is also ruined for a sample with highly crystalline poly-Si(n) that is >1.5x thicker than the more amorphous poly-Si(n). This study may aid in the development of poly-Si thin films that, combined with a diffusion barrier layer, provide the highest protection against copper-induced degradation in scalable, copper-metallized PV cells.
No takes yet. Share an insight, caveat, or question.
Sakakibara et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: