Answers are grounded in this paper and cite their sources.
In conventional point-by-point construction, a tangent-plane approximation is used to determine adjacent surface points without explicitly accounting for local curvature. We therefore propose a local arc and normal control (LANC) method and apply it to design the freeform mirror in the panoramic annular relay system. A local arc replaces the tangent plane, and its radius controls the local curvature and the position of the adjacent feature point. A normal-control angle adjusts the out-of-plane normal direction. Image-point error and normal continuity define the optimization objective, while particle swarm optimization determines the local construction parameters. Successive extension from the minimum to the maximum radial field, combined with parallel computation, generates the discrete freeform point cloud. The LANC method was evaluated over a range of construction conditions. Its construction RMS error remained more than 9% below that of the conventional construction-and-iteration (CI) method in the tests of the design example. Taking the fabricated panoramic head module as an example, the construction RMS error was reduced from 0.2261 mm to 0.1887 mm, a reduction of 16.54%. The resulting point cloud was used as the initial surface for a panoramic annular relay system covering a 40°–80° field of view. The 61-mm-long relay contains only one cemented doublet and one freeform surface. Its modulation transfer function exceeds 0.35 at 60 lp/mm for all fields. An azimuth-dependent radial mapping derived from the optical design was then combined with inverse mapping to correct a captured annular image.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: