Answers are grounded in this paper and cite their sources.
Although radial variations in bamboo anatomy are well documented, their quantitative relationships with the physical and mechanical performance of laminated veneer bamboo (LVB) and their implications for product selection remain insufficiently established. This study investigated the effects of radial strip position on LVB properties manufactured from Gigantochloa apus and evaluated selected requirements of the ISO 21629-1:2021 standard for indoor bamboo flooring. Inner, middle, and outer strips were fabricated into LVB panels (LIVB, LMVB, and LOVB, respectively) using a water-based polymeric isocyanate adhesive. Physical and mechanical properties were evaluated. From LIVB to LOVB, density increased from 590 kg m−3 to 770 kg m−3, whereas porosity decreased from 62% to 49%. LOVB exhibited the highest modulus of elasticity (12.8 GPa), modulus of rupture (89.8 MPa), and glue shear strength (7.9 MPa). All panels showed zero delamination, but only LOVB met the minimum modulus of rupture requirement among the evaluated criteria. These findings demonstrate that radial strip selection is an effective approach to tailoring LVB performance, with outer strips showing the greatest potential for indoor bamboo flooring. However, further assessment is required to establish full compliance with the standard.
No takes yet. Share an insight, caveat, or question.
Darwis et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: