Answers are grounded in this paper and cite their sources.
In recent times, more attentions have been given to biodegradable reinforcement materials where modifications are necessary before incorporation or during production which serves as drawback in some respect. Besides, some areas of applications up till now really solely or partially on the use of synthetic based reinforcement materials. Hence, this research used Kevlar 29 fiber as a reinforcing constituent in epoxy matrix composites for demanding structural and protective applications. The study bridged a critical knowledge gap regarding how composite performance evolves across a wide range of fiber loading, particularly, across the transition from effective reinforcement to property-specific behaviour by developing Kevlar 29 fiber reinforced epoxy composites across a loading range of 3–18 wt%. Stir casting and open mould techniques were used in the production of the samples followed by testing in accordance with standards after curing. Mechanical and wear properties were examined followed by characterization of the fractured surfaces. The results showed that the optimum fiber content depends on the property and the loading mode. Bending strength and modulus peaked at 6 wt% with a value of 52.77 MPa and 2.38 GPa culminating to 73% and 25% enhancements, respectively. Sample with 18 wt% was the best in Young's modulus with a value of 1.75 GPa (106% enhancement), elongation at break was 13.0% (261.11% enhancement) and impact strength of 0.811 J/mm² (61.6% enhancement) while hardness and wear resistance were optima at 3 wt% with a value of 65.36 HS and the wear index of 0.025. The results revealed a transition property from brittle to ductile tendencies as the reinforcement content increases. While high hardness and wear resistance was observed at 3 wt%, moderate values were noticed within 6–12 wt% and high strength and ductility was obtained within 15–18 wt%. Hence, it was discovered that, optimal mechanical and tribological performance is loading mode dependent. Scanning electron microscopy, energy dispersive X-ray spectroscopy, and Raman spectroscopy provided complementary morphological, elemental, and spectroscopic evidence of the interfacial and structural characteristics of the composite. The observed property-specific performance trends established a structure-property relationship framework that provides experimentally grounded guidance for the design of lightweight Kevlar 29/epoxy composites for structural and protective applications.
No takes yet. Share an insight, caveat, or question.
Adeyanju et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: