Answers are grounded in this paper and cite their sources.
This study evaluates miscible CO2-enhanced oil recovery, post-EOR CO2 storage, and long-term postinjection behavior in a mature offshore sandstone reservoir using compositional simulation. A PVT-tuned Peng–Robinson model gave a pure-CO2 minimum miscibility pressure of 2,528 psia by the multiple-mixing-cell method, and reservoir pressure remained above this value in all CO2-EOR cases. Five strategies (continuous CO2; fixed and tapered water-alternating-gas (WAG); a CO2 slug followed by WAG; and simultaneous water-and-gas injection) were compared from a common 2027 reference state. A 36-month CO2 slug followed by alternating six-month CO2 and six-month water periods was preferred: it produced 69.61 MMstb (8.64% of stock-tank oil initially in place), 50.06 MMstb more than continued waterflooding, and retained 9.86 of 21.42 Mt injected CO2 (46.0%). Post-EOR storage at 140 MMscf/d for 15 years, selected from three rate cases because injectivity rather than nominal rate controlled the stored mass, raised the total retained CO2 to 44.81 Mt (79.5% of 56.37 Mt injected); field-average pressure then declined from 6,955 to 6,385 psia over 100 years of shut-in monitoring. Plume expansion was limited, CO2 partitioned progressively into the oleic and aqueous phases, and mobile gas-phase CO2 decreased. The results show that a single mature, heavily waterflooded UKCS reservoir can deliver 6.2 percentage points of additional recovery and retain close to 45 Mt CO2 within its estimated operating-pressure envelope, providing a quantified reservoir-engineering basis for repurposing late-life North Sea oil fields as CO2 storage sites. Geomechanical, well-integrity, surface-processing, economic and lifecycle assessments are required before implementation.
No takes yet. Share an insight, caveat, or question.
Ghlaim et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: