Answers are grounded in this paper and cite their sources.
Carbonate reservoirs commonly exhibit limited oil recovery because of strong heterogeneity, complex pore structures, and unfavorable wettability. This study presents an integrated experimental-numerical framework for evaluating engineered-water flooding and optimizing injection strategies in the heterogeneous WQ1-57 carbonate reservoir. Laboratory core-flooding experiments were combined with geochemical modeling, multiphase-flow calibration, scale-up, reservoir simulation, and sensitivity analysis. Engineered-water injection consistently enhanced oil displacement, yielding incremental recoveries of 11.7–22.8% across the investigated cores. The calibrated numerical model reproduced the experimental recovery and pressure responses and was subsequently used to evaluate radial, line-drive, and conformance-controlled injection configurations. Among these strategies, conformance-controlled injection provided the most favorable reservoir response, increasing oil recovery by 18.1%, delaying water breakthrough by 0.30 pore volumes, improving areal and vertical sweep by 17% and 20%, respectively, and reducing water cut by 15%. Sensitivity analysis identified horizontal permeability as the dominant control on incremental recovery, followed by residual oil saturation and relative-permeability behavior, whereas engineered-water ionic composition, vertical permeability anisotropy, and injection conditions showed comparatively smaller effects. These findings demonstrate that engineered-water performance is governed by the coupled effects of fluid-rock interactions, reservoir heterogeneity, and injection management.
No takes yet. Share an insight, caveat, or question.
Alwan et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: