Answers are grounded in this paper and cite their sources.
In multi-chip cascaded touch and display driver integration (TDDI) systems, inter-chip clock phase uncertainty can cause cycle-level random timing shifts in the REQ/ACK handshake link, leading to inconsistent touch-control timing among cascaded chips. This paper presents a chip-level cascaded clock synchronization architecture based on three cooperative mechanisms. First, the PLL feedback clock periodically re-synchronizes the AD_CLK divider counters, establishing a fixed phase relationship across cascaded AD_CLK domains sharing a common reference clock. Second, a dual-output phase-adjustable divider with half-cycle resolution provides programmable phase compensation for master and slave clocks. Third, the launch and capture phases in the REQ/ACK link are adjusted to avoid the setup/hold-sensitive region during capture. This converts uncertain inter-chip timing into a configurable, calibratable deterministic relationship. Simulation and fabricated-chip measurement results demonstrate reliable operation from −35 °C to +105 °C. With an AD_CLK period of 55.56 ns, the measured ACK edge-distribution range with respect to REQ is approximately 11.9 ns, and measurements indicate a minimum separation of approximately 14 ns between the ACK edge and the adjacent capture-clock edges. No cycle-level random timing shift was observed under the tested operating conditions. System-level validation confirms stable display-driving and touch-sensing synchronization between master and slave chips. The design has been deployed in mass-produced automotive display products.
No takes yet. Share an insight, caveat, or question.
Hou et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: