Answers are grounded in this paper and cite their sources.
Low-speed ground checks are needed to obtain condition-related information before accelerating a UAV propeller whose integrity is uncertain. A 17-inch, two-bladed propeller was operated at approximately 2100 rpm while acoustic signals from the low-cost DFR0034 and reference GRAS-46AE microphones, thrust, torque, and current were recorded simultaneously. Eighteen runs and nine stationary-background recordings covered specimen A before and after damage and a separate damaged specimen B, with three remountings and two runs per remounting in each state. Band-limited Hilbert envelopes from the central 20 s were resampled by rotational phase to obtain a normalized first-order rotation-synchronous amplitude, I1,θ, from averaged complex Fourier coefficients. In the exploratory 250–1000 Hz band, DFR0034 I1,θ increased from 0.036 ± 0.009 to 0.200 ± 0.073 after damage to specimen A; GRAS-46AE values increased from 0.015 ± 0.005 to 0.075 ± 0.034 (mean ± SD, six runs per state of the same specimen). Mean thrust-channel first-order amplitude increased from 0.083 to 0.185 N. Mean increases persisted after excluding remounting blocks and shifting the start times of 2, 5, and 10 s windows, but individual run values overlapped and contrast directions varied across bands. Analyses of 1800 synthetic signals with additive noise and 600 controls without added noise revealed a finite-record amplitude floor and estimation bias; nominal coverage of resampling intervals was not guaranteed. Rotation-synchronous modulation extracted with a low-cost microphone is therefore a candidate feature for low-speed ground inspection; generalized damage-discrimination performance remains unassessed because only one independent before–after specimen pair and post hoc band selection were used.
No takes yet. Share an insight, caveat, or question.
Lee et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: