Answers are grounded in this paper and cite their sources.
Cenosphere lightweight concrete (CLC) offers a means of reducing the self-weight of cementitious materials. This study combined compression testing and a two-dimensional mesoscale lattice model to investigate cement-based CLC (R-CLC) and alkali-activated slag-based CLC (A-CLC) at target fresh wet densities of 800–1000 kg/m3. A-CLC exhibited higher compressive strength despite the lower 28-day compressive strength of its cenosphere-free matrix: 18.30 MPa compared with 40.32 MPa for the cement-based matrix. The different binder compositions and water-to-binder ratios were considered when interpreting this comparison. CT-derived porosities were used to generate the mesoscale geometries. Matrix element properties were calibrated against pure-matrix tests, while the 900 kg/m3 CLC cases were used for composite-level calibration; the 800 and 1000 kg/m3 cases were reserved for validation. The model predicted predominantly interface-initiated damage in R-CLC and wall-initiated damage in A-CLC, followed by crack propagation and coalescence. These predictions depend on the adopted effective phase properties and discretisation. Increasing the specimen aspect ratio numerically reduced compressive strength, with a larger reduction for A-CLC in the investigated configurations. Scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS) provided qualitative interfacial elemental information.
No takes yet. Share an insight, caveat, or question.
Zhao et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: