Answers are grounded in this paper and cite their sources.
This paper aims to investigate the various strengthening techniques for restoring the flexural performance of ultra-high-performance fiber-reinforced concrete (UHPFRC) beams with a simulated reduction in tensile reinforcement, represented by removing one or two steel bars to model a simplified condition of reinforcement loss due to corrosion. The strengthening techniques include near-surface mounting (NSM) of carbon fiber reinforced polymer (CFRP) bars, glass fiber reinforced polymer (GFRP) bars, and a CFRP plate. In addition, a CFRP sheet was used as an externally bonded layer on the tension side of the beam. Six beams were fabricated, which had a cross-section measuring 120 mm in width and 185 mm in depth, with an overall length of 1500 mm. All the beams were tested using a four-point flexural test. The results indicate that the strengthening techniques used significantly improved the load-carrying capacity. The B-2-CFRP beam exhibited the highest ultimate load, representing a 55.6% increase over the control beam (B-CS). In addition, the B-2-CFRP beam demonstrated superior serviceability performance with the highest energy absorption capacity, with 228.2%, compared to the B-CS beam. The predicted-to-experimental capacity ratios ranged from 0.95 to 1.17.
No takes yet. Share an insight, caveat, or question.
Abadel et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: