Answers are grounded in this paper and cite their sources.
Water flooding, a widely used improved oil recovery (IOR) method, faces significant challenges from high water cut and mineral scale formation, which reduce reservoir permeability and recovery efficiency. To address these challenges concurrently, a new green polymeric nanocomposite composed of silica nanoparticles, and xanthan gum (NCs) is developed in this work. Comprehensive characterization including Fourier‑transform infrared spectroscopy, X‑ray diffraction, scanning electron microscopy, transmission electron microscopy, energy‑dispersive X‑ray spectroscopy, Brunauer–Emmett–Teller analysis, and X‑ray photoelectron spectroscopy confirmed the successful synthesis of a mesoporous nanocomposite with a hybrid amorphous‑crystalline structure. Laboratory compatibility tests on sandstone cores revealed that ten‑time diluted seawater (0.1SW) exhibited the lowest scale tendency. Optimization studies identified 400 ppm as the optimal concentration of NCs. At this concentration, the contact angle of the untreated oil-wet rock (126.67°) was reduced to 58.96°. When the optimal concentration of NCs was combined with 0.1SW, the contact angle was further reduced to 41.42° (scenario S1), compared to 108.0° for 0.1SW alone. Spontaneous imbibition experiments (capillary-driven, no external pressure) demonstrated that S1 achieved 45.96% recovery. Forced displacement core flooding (with pressure gradient) achieved 48.0% recovery. Field-scale Eclipse simulations, history-matched to 26.4 years of actual production data, projected a 48.21% ultimate recovery for S1– consistent with the forced displacement results and reflecting field-scale sweep efficiency. The NCs‑fluid system presents potential strategy for enhancing oil recovery and managing production challenges in sandstone reservoirs.
No takes yet. Share an insight, caveat, or question.
Wang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: