Answers are grounded in this paper and cite their sources.
In heterogeneous heavy oil reservoirs, in situ combustion is often limited by combustion-front fingering, gas channeling through high-permeability pathways, and insufficient mobilization of oil in low-permeability zones. To address these limitations, this study proposes a high-temperature-resistant air-foam strategy for plugging high-permeability gas-channeling pathways and regulating the combustion profile. Static foam evaluation showed that FCS-1190 foam retained good foamability and stability at 300 °C, while also exhibiting aging resistance and oil tolerance. Two-dimensional combustion-tube experiments further showed that, during conventional heterogeneous in situ combustion, fluids preferentially broke through the high-permeability layer, resulting in non-uniform combustion-front propagation, uneven temperature distribution, coke deposition and residual-oil enrichment in the low-permeability zone, and a final oil recovery of 40.10%. After injection of 500 mL foaming-agent solution, the temperature field, oil-production behavior, and residual-oil distribution indicated that gas channeling through the high-permeability pathway was suppressed and that the combustion front expanded more uniformly in the vertical direction. In the foam-assisted experiment, oil recovery reached 67.13% at 62 h, representing an increase of 27.03% points over the conventional heterogeneous experiment. The residual-oil distribution and temperature-field evolution further confirm that high-temperature-resistant air foam can expand the swept volume of fire flooding and improve combustion uniformity in heterogeneous reservoirs. This study provides experimental evidence for improving the development performance of in situ combustion in heterogeneous heavy oil reservoirs.
No takes yet. Share an insight, caveat, or question.
Hao et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: