Answers are grounded in this paper and cite their sources.
Accurate characterization of complex shale pore networks is critical for various applications ranging from understanding and modeling pore-level changes in caprocks for carbon capture, utilization, and storage sites to unconventional energy exploration. However, the reliability of low-pressure nitrogen adsorption (LPNA) remains hindered by unstandardized sample crushing protocols, introducing an analytical paradox between internal pore accessibility and mechanical structural alteration. Limited studies address this gap, particularly concerning shales in the Indian subcontinent. Furthermore, existing investigations typically rely on restricted sample sets. To address this limitation, this study systematically evaluates the impact of distinct crushed particle sizes, namely M-40 (425 μm), M-120 (125 μm), and M-200 (75 μm), using eight representative core samples from two different formations and sub-basins, namely the Barren Measures (BMF) and Raniganj Formation (RF) from the Raniganj sub-basin (RSB) and Jharia sub-basin (JSB) in the Damodar Valley Basin (DVB), India. A unique multiscale multiphysics approach was deployed, integrating crushed-pore-scale quantitative mineralogy analysis via Rietveld refinement on X-ray diffraction (XRD) data and LPNA parameters of the rock with core-scale high-frequency benchtop ultrasonic analysis. The results indicated that the argillaceous BMF exhibited significantly higher specific surface area (SSA) and total pore volume (TPV) compared to the arenaceous quartzofeldspathic RF. It is also observed that a reduction in particle size systematically enhances gas accessibility, with M-200 yielding SSA values approximately 2.1 times and 1.8 times higher than M-40 in the BMF and RF, respectively. Clay-rich BMF largely retained H3 hysteresis across all particle sizes, whereas the mixed clay-sand RF shifted from H4 to H3 upon progressive reduction of particle size. While bulk-scale compressional wave velocities (Vp) correlate inversely with SSA and TPV, as the fractions get finer, the intermediate M-120 fraction provides the most robust linear relationships overall, with intrinsic clay mineralogy (R2 = 0.69) and internal pore cross-plots (R2 = 0.88). Based on our analysis of the DVB shales, we conclude that the intermediate M-120 fraction represents the optimal threshold for LPNA characterization, successfully liberating isolated nanopores without introducing over-crushing artifacts. The findings from this multiphysics approach advance the standardization of adsorption-based pore characterization in shales, especially for the Indian unconventional reservoir rocks.
No takes yet. Share an insight, caveat, or question.
Jamwal et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: