Answers are grounded in this paper and cite their sources.
In O-cell pile load tests conducted at high-fill mine spoil-dump sites, testing is often terminated before the pile reaches its ultimate bearing state owing to the loading-capacity limitation of the O-cell and the requirement to avoid destructive loading of engineering piles, making it difficult to directly determine the ultimate vertical bearing capacity of the pile. To address this issue, a prediction method based on the limited-memory Broyden–Fletcher–Goldfarb–Shanno algorithm with box constraints (L-BFGS-B) is proposed. Based on load-transfer theory, a depth-dependent ideal elastoplastic model for shaft resistance and a bilinear hardening model for toe resistance are established. The soil-layer-specific coefficients governing the depth-dependent shaft stiffness and the corresponding pile–soil interface elastic-limit displacements, together with the pile-toe initial stiffness, hardening stiffness, and elastic-limit displacement, are back-analyzed within prescribed bounds by minimizing the mean squared displacement residual between the measured and calculated O-cell responses. The complete load–displacement responses of the upper and lower pile segments are then reconstructed and converted into an equivalent conventional pile-head load–displacement curve using the equal-displacement method, from which the ultimate bearing capacity is determined. Finally, ABAQUS numerical models of the O-cell test and conventional static load test are established for comparative analysis. The results show that the proposed method effectively reproduces the measured O-cell responses, and the back-analyzed axial-force distributions are in good overall agreement with the numerical simulation results. The predicted ultimate vertical bearing capacity of the single pile agrees well with the conventional static-loading simulation result, with a relative deviation of approximately 5.9%. The proposed method provides an efficient approach for back-analyzing load-transfer parameters from incomplete O-cell test data and predicting the bearing capacity of single piles in high-fill mine spoil-dump sites.
No takes yet. Share an insight, caveat, or question.
Xiao et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: