Answers are grounded in this paper and cite their sources.
High-dosage styrene-butadiene-styrene (SBS) modified asphalt has excellent high-temperature performance but suffers from high viscosity, poor workability, limited low-temperature toughness, and aging susceptibility. To address these drawbacks, this study introduces a composite modification using organic montmorillonite (OMMT) and rubber oil. Composite asphalts were prepared via high-speed shearing and tested using dynamic shear rheometer (DSR), bending beam rheometer (BBR), linear amplitude sweep (LAS), fluorescence microscopy, and Fourier transform infrared spectroscopy (FTIR). Rubber oil improved fluidity and low-temperature crack resistance by promoting SBS swelling, while OMMT enhanced high-temperature stability through nano-reinforcement and barrier effects. Orthogonal analysis identified the optimal formulation: 16% SBS, 25% rubber oil, and 1%–3% OMMT. Within this range, a stable nanocomposite network formed, achieving high and low-temperature performance grades of 94°C and − 36 ° C . After aging, the composite showed lower aging indices and over 30% longer fatigue life than conventional SBS asphalt. Although OMMT/rubber oil composites effectively balance these properties, the optimal OMMT dosage is critical, as excessive addition ( > 3 % ) may lead to particle agglomeration and other issues. The OMMT/rubber oil approach is effective for developing high-performance asphalt under extreme conditions.
No takes yet. Share an insight, caveat, or question.
Lv et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: