Answers are grounded in this paper and cite their sources.
Resilient infrastructure in seismic regions requires bracing systems that add stiffness, strength and energy dissipation to steel moment-resisting frames. This study evaluates O-grid circular bracing with rings of rectangular (RHSs) and circular hollow sections (CHSs). Cyclic ABAQUS analyses, checked against published tests on a bare frame and two O-grid-braced frames, compared O-grid rings of I-, H-, RHS and CHS sections at equal steel area and assessed 15 RHS and six CHS rings parametrically. The O-grid frames raised the initial stiffness of the bare frame by 5–51%, its peak load by 19–47% and its dissipated energy by about 35–80%. The RHS and I-section rings differed by less than 4% in peak load and 7% in energy; both buckled out of plane in two half-waves, by up to 109 mm (RHS) and 223 mm (I-section). Ductility at the largest imposed displacement was similar (μ ≈ 6.4–7.1). Raising the RHS aspect ratio from 1 to 3 increased the stiffness by 31% but the peak load by only 6%, with out-of-plane and distortional buckling from h/b = 2; varying the CHS D/t from 14 to 61 changed the peak load and energy by about 5%. The results quantify the trade-off between strength, stiffness and stability.
No takes yet. Share an insight, caveat, or question.
Adarsha et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: