Answers are grounded in this paper and cite their sources.
Slender cylindrical radiation thermometers have been proposed as an alternative to conventional globe thermometers for outdoor thermal comfort assessment, as they better represent pedestrians’ exposure to solar radiation. Nevertheless, determining the mean radiant temperature from their measurements requires an accurate estimate of the convective heat transfer coefficient. For these devices, forced and natural convection are governed by different characteristic lengths, namely the cylinder diameter, D, and height, H, respectively. Based on measurements from a preliminary outdoor experimental campaign with a cylindrical radiation thermometer, the Richardson number calculated using these two characteristic lengths, RiHD, was found to be of the order of unity, initially suggesting the possible occurrence of mixed convection. However, suitable mixed convection correlations for this configuration are unavailable. Therefore, Computational Fluid Dynamics simulations were conducted to determine the convective heat transfer coefficient under different conditions. The results showed that, in 23 out of 25 investigated cases, the convective coefficients obtained from the numerical simulations fell within the range of established forced convection correlations or exceeded its upper limit by less than 1%. Larger deviations, of 5.2% and 9.2%, occurred only under combinations of very low wind speeds and large air-cylinder temperature differences, unlikely to occur in typical outdoor thermal comfort applications. Furthermore, the conventional Richardson number thresholds were found to be unsuitable for interpreting RiHD, whereas the Richardson number calculated using the cylinder diameter for both natural and forced convection, RiD, provided indications consistent with the identified convection regimes. Overall, these findings support the use of standard forced convection correlations for estimating the convective coefficient of cylindrical radiation thermometers under typical outdoor conditions, simplifying the determination of the mean radiant temperature and supporting the assessment of passive heat mitigation strategies in urban environments.
No takes yet. Share an insight, caveat, or question.
Guilizzoni et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: