Answers are grounded in this paper and cite their sources.
Mild wear reshapes gear tooth flanks and alters load sharing, mesh stiffness and transmission error, which, in turn, alter the contact pressure driving further wear. A cycle‐resolved framework closing this loop is presented for a spur gear pair. It combines loaded tooth contact analysis, elastohydrodynamic film thickness, flash temperature and an Archard‐type wear law with a phenomenological lubrication closure and feeds the worn flank into the next block of cycles. The wear coefficient is an effective parameter, inferred by Bayesian calibration from two published wear depths and conditional on the reference system. The evidence comprises verification, calibration consistency and cross‐system comparison; no independent experimental validation is claimed. Accuracy loss is defined by an assumed 16 µm threshold on the wear‐induced total profile deviation of the pinion, between its ISO 1328‐1 Class 6 and 7 tolerances (13 and 19 µm). For the reference FZG type C pair, this threshold is reached after about 1.0 × 10 7 revolutions, at 0.21 of the life to a 45 µm depth limit (numerical uncertainty a few per cent). Time‐resolved dynamic wear agrees with a peak‐factor approximation at the critical station, but the dynamic life reduction ranges from 8% to 37%, depending on how tooth‐pair entry is modelled. Wear coefficient and torque dominate the output variance; the oil‐temperature effect depends strongly on the unvalidated closure. A fitted dimensionless feedback relation predicts the wear depth of two further spur geometries within a stated domain. All results are observations for the simulated reference system.
No takes yet. Share an insight, caveat, or question.
Yunus Emre Karabacak (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: