Answers are grounded in this paper and cite their sources.
Multi-pad gas foil bearings (GFBs) improve rotordynamic stability, but segmenting the top foil can reduce load capacity. This study compares one-, two-, and three-pad gas foil journal bearings of identical dimensions under vertical load and without mechanical preload. The compressible Reynolds equation was coupled with a refined foil model in which the bump foils respond to the axially averaged film load and the top foil deflects locally between bumps; the model was validated against published film-thickness measurements. The two-pad bearing nearly matched the load capacity of the one-pad bearing and substantially exceeded that of the three-pad bearing. Its horizontal pad junctions preserve the main pressure lobe but reduce the horizontal stiffness, and the resulting stiffness anisotropy considerably enlarges the predicted rigid-rotor stability margin. Extending the arc of the lower pad raises the horizontal stiffness with negligible loss of load capacity. This asymmetric design provides the largest predicted stability margin at light loads, and the symmetric design at moderate loads. These findings offer valuable insights for the design of multi-pad gas foil bearings.
No takes yet. Share an insight, caveat, or question.
Ying et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: