Answers are grounded in this paper and cite their sources.
The motivation of this study is to reduce the bearing loads of a short-neck rigid overhung rotor arising from two imbalance-related mechanisms: the centrifugal force caused by an offset center of mass and the precession-induced force caused by misalignment between the rotor shaft and a principal inertia axis. A wafer-cleaning holder press-fitted coaxially onto a motor shaft is considered. Because the connecting neck is very short, its elastic deformation is neglected and the assembly is modeled as a rigid overhung rotor. For a geometrically complex and mass-imbalanced rotor, the off-diagonal inertia-tensor components [Formula: see text], [Formula: see text], and [Formula: see text] may be nonzero, so the prescribed shaft axis need not coincide with a principal inertia axis and torque-free precession can occur. To obtain an exact balancing solution, a theorem-oriented formulation is derived from Euler’s rotational equations. For the prescribed initial condition [Formula: see text] and [Formula: see text], we prove that the necessary and sufficient conditions for the rotor to maintain constant-speed pure spin about its shaft are [Formula: see text] and [Formula: see text]. These conditions make the prescribed shaft axis a principal inertia axis and suppress the rigid-body precession associated with shaft–principal-axis misalignment. The additional conditions [Formula: see text] and [Formula: see text] place the combined center of mass on the shaft axis and eliminate the centrifugal-force component caused by mass imbalance. Two compensating masses are attached on two axially separated correction planes. Their two masses and two angular positions constitute four unknowns, which are determined exactly from the four balancing conditions [Formula: see text]. Numerical integration of the nonlinear Euler equations together with quaternion orientation kinematics is used to reconstruct the shaft-marker trajectory. In addition to the nominal pure-spin case, an external-torque-impulse comparison imposes the same post-impulse condition, [Formula: see text] rad/s and [Formula: see text] rad/s, on the uncorrected and corrected rotors. The uncorrected rotor, for which [Formula: see text] and [Formula: see text] are nonzero, develops pronounced angular-velocity oscillations and a clearly resolved precessional trajectory. After correction, [Formula: see text] and the response is strongly suppressed. The corrected transverse principal moments remain unequal, [Formula: see text], so the residual post-impulse motion is small and bounded rather than identically zero. These results demonstrate the effectiveness and robustness of the mass-property correction within the stated rigid-body model while preserving the distinction between balance-induced precession suppression and the bearing reaction generated by the external impulse itself.
No takes yet. Share an insight, caveat, or question.
Hsu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: