Answers are grounded in this paper and cite their sources.
Conventional starch-based fluid-loss reducers perform poorly when high temperature is combined with high salinity or calcium contamination. This work developed a zwitterionic starch-graft copolymer, J-1, to improve performance under these conditions. Corn starch served as the backbone. N,N-dimethylacrylamide (DMAA), 2-acrylamido-2-methylpropanesulfonic acid (AMPS), and [3-(methacryloylamino)propyl]dimethyl(3-sulfopropyl)ammonium hydroxide inner salt (MPDSAH) were grafted onto it. After hot rolling at 160 °C for 16 h, 2.0 wt% J-1 gave API and HTHP fluid losses of 1.8 and 13.4 mL. Under saturated NaCl conditions, these values were 2.8 and 16.4 mL. In a 2.0 g/cm3 barite-weighted fluid containing 3.0 wt% J-1 and 3.0 wt% NF-1, the values were 5.4 and 24.0 mL. Mechanistic tests showed that J-1 adsorbed on clay surfaces and limited salt- and calcium-induced aggregation. It also promoted finer particle dispersion and a denser filter cake. At 2.0 wt%, J-1 reduced filter-cake permeability by 98.7%. The product showed low biotoxicity and favorable environmental compatibility. These results support its use as a starch-based fluid-loss reducer for high-temperature water-based drilling fluids.
No takes yet. Share an insight, caveat, or question.
LIU et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: