Answers are grounded in this paper and cite their sources.
Optical coherence tomography (OCT) can detect changes in the length of the optical path on the nanometer scale and has potential applications in metrology, nondestructive testing, and medicine. Traditionally, spectral-domain OCT (SD-OCT) has been preferred over swept-source OCT (SS-OCT) for phase-sensitive applications due to its inherently higher phase stability; however, in this work, we demonstrate that high phase stability can also be achieved using SS-OCT. We compare the phase stability of two data acquisition techniques using a 400 kHz and 1 MHz swept micro-electromechanical systems (MEMS)-based vertical-cavity surface-emitting laser (VCSEL) light source and quantitatively assess the achievable displacement sensitivity. Measurements using fiber-based Mach-Zehnder-Interferometers (MZIs) characterize the combined phase stability of the MEMS-VCSEL swept source, synchronization, and acquisition chain under controlled conditions, while measurements using separate sample and reference arms demonstrate their applicability to phase-sensitive OCT. Our results confirm the phase-stable acquisition of OCT data at the ultimate signal-to-noise ratio (SNR) limit, reaching nearly 1 mrad. In most applications, phase sensitivity will be limited by the interferometer and measurement conditions rather than the stability of the MEMS-VCSEL light source. We demonstrate that a high displacement sensitivity is achievable, measuring A-scans and B-scans when a reference phase is available.
No takes yet. Share an insight, caveat, or question.
Bachor et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: