Answers are grounded in this paper and cite their sources.
The objective of this paper is to experimentally investigate how the different geometries of the nozzle edge - rounded and sharp – affect the flow, thermal, acoustic, and energetic performance of a synthetic jet actuator. Both configurations are evaluated under identical dimensionless flow conditions, namely the same Reynolds and Strouhal numbers, and with the same internal diameter of the nozzle, matching these integral flow parameters. The findings indicate that the rounded nozzle edge alters the instantaneous synthetic jet flow field near the exit plane, resulting in a lower peak velocity during the ejection stroke. The rounded nozzle configuration decreases the actuator’s power consumption by up to 30% near resonance compared to the sharp-edged nozzle. For the rounded-edge nozzle, the maximum estimated energetic efficiency of the synthetic jet actuator reaches 31.1%, whereas for the sharp-edged nozzle it attains a maximum of 26.9%. Additionally, the rounded-edge nozzle reduces the sound pressure level (SPL) of the synthetic jet actuator by up to 10 dB relative to the sharp-edged nozzle under the same flow conditions. The heat transfer performance under synthetic jet impingement cooling using rounded-edge and sharp-edges nozzle, for identical dimensionless parameters and the same dimensionless jet-to-surface spacing x / d , is generally similar. The main discrepancy occurs at small jet-to-surface distances ( x / d < 4), where the Nusselt number increases sharply by approximately 25–50% for the rounded-edge nozzle compared to the sharp-edged one.
No takes yet. Share an insight, caveat, or question.
Markowicz et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: