Answers are grounded in this paper and cite their sources.
The spray combustion of waste cooking oil (WCO) biodiesel in an industrial-furnace swirl burner was investigated by large-eddy simulation (LES) using an Euler-Lagrange spray model, a multi-component surrogate, and the CRECK-FAME mechanism. The effects of swirl vane angle (35°, 45°, 55°) and spray cone angle (45°, 60°) on flow organization, flame structure, and NO/soot formation were examined. Results show that the spray cone angle mainly governs fuel-jet/recirculation-zone matching, whereas the swirl vane angle regulates recirculation intensity, shear-layer development, and vortex transport. The 35-60 case produced the largest recirculation zone, with an area of 0.03740 m 2 and an axial length of 0.4575 m, while the 55-60 case showed the highest mean velocity and vorticity level. For combustion characteristics, the 35-45 case gave the highest mean temperature of 1580.81 K and the largest high-temperature and high-OH ratios of 0.314 and 0.533, respectively, indicating stronger combustion intensity. NO was mainly associated with high-temperature residence time, whereas soot was affected by fuel-rich regions, oxidation, and transport. The 55-45 case exhibited the highest normalized NO tendency, while 45-60 and 35-60 showed the highest and lowest soot tendencies, respectively. These indicators describe relative differences among cases, not absolute emissions. The 55-60 case offered a favorable balance between combustion continuity, mixing, and NO/soot control.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: