Answers are grounded in this paper and cite their sources.
Partitioning of mineralogical and morphological features in three Western Australian haematite-goethite ores during milling was investigated. Samples were milled for different time, sieved into six particle size fractions (2.0 – 4.0, 1.0 – 2.0, 0.5 – 1.0, 0.25 – 0.5, 0.1 – 0.25, and < 0.1 mm), and characterised using X-ray diffraction (XRD), optical microscopy, scanning electron microscope equipped with energy-dispersive X-ray spectroscopy (SEM-EDS), SEM-EDS-based mineral liberation analysis, and nitrogen physisorption for their mineralogical and morphological features. Results show pronounced size-dependent mineral partitioning governed by mineralogical and mechanical contrasts. Kaolinite and greenalite preferentially concentrated in the fine fractions, whereas goethite and quartz tended to remain in the coarser fractions, and haematite remained broadly distributed across all size fractions. The extent of partitioning increased with gangue content and milling time. Mineral liberation analysis confirmed rapid liberation of gangue, particularly in the fines, supporting preferential liberation and redistribution during milling. SEM-EDS observations revealed a mixed fracture regime involving both interfacial and intragranular breakage. N 2 physisorption showed that total pore volumes in the fine fractions (0.1 – 0.25 and < 0.1 mm) were approximately 2 – 15 times higher than those in the coarse fractions (2.0 – 4.0 and 1.0 – 2.0 mm), while the relative contribution of micropores to total pore volume decreased from up to 28.8% in the coarse fractions to generally below 6.8% in fines.
No takes yet. Share an insight, caveat, or question.
Xu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: