Answers are grounded in this paper and cite their sources.
Large-diameter monopile foundations are the predominant support system for offshore wind turbines. Current design approaches range from the standard p–y method to full three-dimensional (3D) numerical analyses. The former can be overly idealized and may not capture key aspects of monopile–soil interaction, whereas the latter is generally more reliable but computationally demanding, particularly for iterative preliminary design. To develop a practical method that retains the essential features of 3D pile–soil interaction while remaining suitable for general design applications, a comprehensive set of 3D finite element (FE) analyses was performed using the NGI-ADP constitutive model. The analyses cover a wide range of pile geometries, load eccentricities, and clay properties. Two analysis series were considered: Series I examined monopiles in uniform clay to establish the base framework for lateral capacity estimation, whereas Series II investigated layered clay profiles to quantify stratification effects and extend the formulation to layered conditions. The proposed approach provides equation-based estimates of lateral capacity and load–rotation response that closely match the 3D FE results across the investigated conditions.
No takes yet. Share an insight, caveat, or question.
Khezri et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: