Answers are grounded in this paper and cite their sources.
The use of advanced numerical methods for the simulation and design of steel components and structures has increased rapidly in recent years. The response of elements experiencing large plastic deformations and even fracture can now be accurately captured. For such analyses, the full true stress-strain relationship of the material up to the fracture strain is required. While pre-necking stress-strain behaviour has been extensively studied, the post-necking behaviour remains less well defined and there are no standardised predictive models. This paper focuses on the post-necking true stress-strain behaviour of hot-rolled steels. Three alternative standardised true stress-strain models for use under any stress state are developed – a Nonlinear post-necking Model (NM), a Simplified Nonlinear post-necking Model (SNM) and a One-stage Nonlinear hardening Model (ONM). Empirical predictive equations for the key post-necking material properties, including the reference true fracture stress and strain, and the roundness of the post-necking true stress-strain curve are developed. The developed predictive equations were derived from a dataset comprising 256 standard tensile coupon tests on hot-rolled steels. Since post-necking behaviour cannot be obtained directly from experimental measurements, each coupon was first numerically simulated, and the key material parameters were extracted from the numerical results. The accuracy of the proposed equations was evaluated and shown to provide good predictive performance, demonstrating their applicability in facilitating the increasing use of advanced computational methods for the analysis and design of steel structures. The SNM formulation, together with the associated predictive equations, provides both high prediction accuracy and a simple functional form, while satisfying the Considère criterion and remaining compatible with existing pre-necking models. The SNM formulation has been accepted for inclusion in EN 1993–1–14, and is suitable, in conjunction with appropriate strain limits and partial factors, for use in both numerical design calculations and simulations.
No takes yet. Share an insight, caveat, or question.
Zhou et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: