Answers are grounded in this paper and cite their sources.
Moment gradients have been shown to enhance the local buckling resistance of steel beam cross-sections. The behaviour of beam-column cross-sections under the combined effects of axial load and moment gradients has yet to be systematically explored and is therefore investigated in the present paper. Accurate finite element models of hot-rolled SHS, RHS and I-section steel beam-columns were first developed using ABAQUS and validated against existing experimental data. Based on the validated FE models, a total of 6574 parametric analyses were carried out to examine the effect of cross-sectional dimensions, loading conditions, steel grade, axial load level and bending moment gradients on structural performance. The results show that the relative influence of the moment gradients remains essentially independent of the axial load level, enabling the range of applicability of a previous developed design method considering the effect of moment gradients to be extended to the case of combined loading. Based on the extensive simulation data, the accuracy and reliability of the current European design approach, together with the proposed design approach, were evaluated. The proposed approach was shown to provide more accurate and consistent resistance predictions than the current Eurocode 3 approach, with an average increase in resistance of around 3% for stiffened sections. The reliability assessment demonstrated that the proposed approach satisfies the specified acceptance criteria for Class 3 and 4 cross-sections, while further calibration is required for Class 1 and 2 cross-sections.
No takes yet. Share an insight, caveat, or question.
Yang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: