Answers are grounded in this paper and cite their sources.
Sea-sand concrete offers clear sustainability benefits for coastal construction, but its adoption in seismic‑resistant structures is constrained by the chloride-induced corrosion of conventional steel reinforcement. This paper deals with the seismic behavior and design of sea-sand concrete shear walls reinforced with longitudinal steel-FRP composite bars (SFCBs) and transverse GFRP reinforcement. A three-dimensional nonlinear finite-element (FE) model is developed in Abaqus to simulate the seismic responses of sea-sand concrete shear walls with composite bars and is validated against quasi-static cyclic test results. The seismic behavior of shear walls with varying design parameters is investigated using the FE model. The parameters examined include the axial compression ratio, stirrup spacing, boundary-element longitudinal reinforcement ratio, concrete compressive strength, steel‑to‑fiber ratio of SFCBs, and shear-span ratio. A sectional method is used to derive design formulas to evaluate the moment capacity of the wall system based on plastic analysis and observed failure mechanisms. It is shown that the developed FE model accurately predicts the experimentally measured seismic responses of shear walls with composite bars. The proposed sectional method yields peak-resistance predictions that are in good agreement with the available experimental and numerical results, while exhibiting a slight conservative tendency. The numerical results presented provide important insight into the seismic behavior of sea-sand concrete shear walls incorporating composite bars. The proposed FE model and sectional method can be used for the short-term seismic assessment and design of sea-sand concrete shear walls reinforced with SFCBs and GFRP bars.
No takes yet. Share an insight, caveat, or question.
Guan et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: