Answers are grounded in this paper and cite their sources.
Controlling grain size in crystalline oxide semiconductors (COSs) has long been a fundamental challenge, with lateral grain dimensions typically limited to several hundred nanometers. Here, we report nucleation-suppression-driven grain engineering in quaternary Al-incorporated In–Ga–O (AIGO) to obtain giant-grain oxide semiconductors (GOS). GOS exhibits giant grains of approximately 18 μm with locally single-crystal-like domains, substantially exceeding the TFT channel dimensions (5 × 5 μm) while being realized through a back-end-of-line (BEOL)-compatible process below 400 °C. Back-channel-etched (BCE) TFTs based on GOS exhibit enhanced electrical performance, with the field-effect mobility increasing from 32.06 cm2 V–1 s–1 in conventional crystalline IGO TFTs to 41.08 cm2 V–1 s–1. More importantly, giant-grain engineering markedly improves device reliability, reducing the threshold-voltage shift (ΔVTH) from 7.21 to 1.38 V under positive bias temperature stress (PBTS), from 8.79 to 0.95 V under negative bias illumination stress (NBIS), and from 10.21 to 1.51 V under negative bias temperature illumination stress (NBTIS). In contrast, excessive Al incorporation suppresses crystallization, resulting in an amorphous phase and degraded device characteristics, highlighting the critical role of composition in balancing crystallization and carrier transport. These findings demonstrate the potential of giant-grain engineering for highly reliable, BEOL-compatible oxide electronics.
No takes yet. Share an insight, caveat, or question.
Kwak et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: