Answers are grounded in this paper and cite their sources.
The development of the green hydrogen economy motivates research on zeolite-based membrane materials. SAPO-34 zeolite, featuring a CHA topology and tunable acidity, has attracted attention as a microporous membrane material for gas separation. Herein, thin dense SAPO-34 zeolite membranes were fabricated through three different strategies, i.e., the in situ crystallization method, the dip coating method, and the hydrothermal treatment method. We evaluated the advantages of these three strategies, as well as the influence of the surface properties of the substrate. It was found that the crystallization time and H2O content greatly influence the thickness of the SAPO-34 zeolite membrane. In addition, the surface property of the substrate was explored, and it behaved dramatically differently in the dip coating method and the hydrothermal treatment method. At 25 °C, a 1 bar transmembrane pressure difference, and equimolar binary gases, a SAPO-H2O-1 membrane with a thickness of ~1 μm, prepared via in situ synthesis, achieved H2 permeance of 6.9 × 10−7 mol·m−2·s−1·Pa−1, with separation factors of 2.3 and 3.9 for H2/N2 and H2/CO2. This work presents a comparative evaluation of three fabrication approaches for SAPO-34 zeolite membranes and discusses how synthesis conditions and substrate characteristics influence membrane formation and structural properties.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: