Answers are grounded in this paper and cite their sources.
Poly(vinylidene fluoride) (PVDF)-based solid polymer electrolytes (SPEs) are attractive candidates for high-safety lithium metal batteries, yet their high crystallinity and restricted segmental motion impede Li+ transport and long-term interfacial stability. Herein, a cross-linked product (PEPA) was synthesized from poly(acrylic acid) (PAA) and poly(ethylene glycol) (PEG) through an EDC/NHS coupling reaction, and subsequently introduced into a PVDF–LiTFSI matrix to prepare quasi-solid polymer electrolyte membranes. FTIR and XRD results reveal a reduced degree of crystallinity together with an increased amorphous fraction, while SEM/EDS and TGA indicate a more compact and uniform membrane morphology and improved thermal stability. The optimized PEPA10SPE exhibits a high ionic conductivity of 1.5 × 10−3 S cm−1 at 25 °C (3.1 × 10−3 S cm−1 at 75 °C) and a markedly enhanced Li+ transference number of 0.70, compared with 0.35 for the pristine PVDFSPE, together with a broadened electrochemical stability window (oxidation onset delayed from approximately 4.4 V to 5.3–5.4 V). Consequently, the Li|PEPA10SPE|LiFePO4 cell delivers an initial discharge capacity of approximately 150 mAh g−1 with a capacity retention of nearly 85% after 500 cycles, while the Li|PEPA10SPE|Li symmetric cell cycles stably for more than 3000 h at 0.2 mA cm−2. This work demonstrates that cross-linking-mediated regulation of the amorphous phase and the Li+ coordination environment is an effective route to high-performance PVDF-based quasi-solid polymer electrolytes for lithium metal batteries.
No takes yet. Share an insight, caveat, or question.
Weng et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: