Answers are grounded in this paper and cite their sources.
Electrical arcs resulting from gas breakdown can act as potential ignition sources for electrical fires in high-voltage electrical equipment. However, the microscopic processes leading to electrical arc formation as a potential ignition source remain insufficiently understood, particularly the different effects of gas pressure and solid dielectrics on gas breakdown and surface flashover. This study investigates the AC breakdown characteristics of N2/O2 mixed gas under different gas pressures in electrode configurations with and without a PTFE (Teflon) dielectric to clarify the effects of gas pressure and the presence of Teflon on breakdown voltage and surface flashover voltage. The breakdown voltages are measured, and their pressure dependence is quantitatively evaluated using linear regression analysis. The breakdown voltages increase with gas pressure in both configurations, but the pressure dependence differs significantly. The regression slopes are 59.143 kV/MPa without Teflon and 16.400 kV/MPa with Teflon, indicating that the pressure dependence without Teflon is approximately 3.6 times as large as that with Teflon. The fitted regression lines intersected at approximately 0.400 MPa, which is consistent with the measured reversal in breakdown voltage and surface flashover voltage between 0.3 and 0.4 MPa. The proposed breakdown mechanisms provide a possible explanation for the different pressure dependences and voltage reversal based on electron generation and streamer development in the two electrode configurations. These findings provide fundamental information on the electrical breakdown processes preceding potential arc formation and may contribute to future studies on electrical ignition sources in air-insulated electrical equipment.
No takes yet. Share an insight, caveat, or question.
Yu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: