Answers are grounded in this paper and cite their sources.
The thoracic spine and rib cage form a coupled load-bearing system, but internal thoracic stress transmission under posterior manual loading remains difficult to quantify experimentally. This preclinical computational study aimed to evaluate thoracic load transmission, whole-model stress and deformation, and local cortical bone stress under controlled posterior manual thoracic loading conditions. Finite element simulations were performed using a previously developed whole spine–thorax model with consistent boundary conditions and quantified mechanical inputs. Six palm-based posterior thoracic loading patterns were simulated under T6 spinous-process loading using experimentally measured mean peak loads and mean equivalent contact areas. Under the superimposed palm–palm-root loading condition, T6 spinous-process loading was compared with left paravertebral loading at T6 under identical loading parameters. Progressive loading was then performed under the representative left paravertebral condition to evaluate local cortical-bone stress concentration and identify the external load at which the predefined 90 MPa reference criterion was reached. Different experimentally defined posterior thoracic loading scenarios produced different whole-model stress and deformation responses. The double-palm condition had the highest measured peak load and also produced the largest whole-model maximum von Mises equivalent stress and maximum total deformation. Compared with T6 spinous-process loading, left paravertebral loading produced a more loaded-side-concentrated stress distribution and lower whole-model maximum von Mises equivalent stress and maximum total deformation. Under progressive loading, high-stress cortical bone regions were mainly concentrated in the upper ribs. The predefined 90 MPa cortical-bone reference criterion was reached at an external load of approximately 730 N. Posterior manual thoracic loading produced distinct whole-model and local cortical bone responses across experimentally defined loading scenarios and force-application sites. The differences among loading patterns were observed under experimentally defined combinations of peak load, contact area, and loading geometry and should not be interpreted as independent effects of these individual parameters. These findings provide model-specific biomechanical evidence for interpreting thoracic stress distribution and regional osseous stress concentration under posterior manual loading.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: