Answers are grounded in this paper and cite their sources.
To improve the performance of CO2–water alternating flooding after water flooding in low-permeability tight sandstone reservoirs, a synergistic alternating flooding technology using CO2 and a low-interfacial-tension viscoelastic fluid (LIFTJ) was proposed. Wettability tests, anti-adsorption tests, mineral reaction experiments, nuclear magnetic resonance (NMR) displacement tests, and heterogeneous dual-tube displacement experiments were conducted to reveal the mechanism of “dissolution-enhanced permeability, wettability-promoted seepage, and profile control/displacement-expanded sweep.” Results show that LIFTJ has good anti-adsorption performance; after three adsorption cycles, the interfacial tension remains on the order of 10−2 mN/m. CO2-carbonated formation water dissolves minerals, increasing gas permeability by up to 17.41%. After synergy, the water-phase contact angle decreases to 6.2°, indicating enhanced hydrophilicity. NMR results show that after water flooding, CO2-LIFTJ alternating flooding increases total mobilization degree by 16.47%, which is 5.56 and 4.77 percentage points higher than CO2 flooding and CO2–water alternating flooding, respectively; crude oil in both large and small pores is effectively mobilized. At a heterogeneous permeability ratio of 5, recovery increases by 13.43%, superior to CO2 flooding (5.67%) and CO2–water alternating flooding (9.63%). The technology achieves multiple synergistic effects through viscosification and mobility control, low-interfacial-tension oil washing, and CO2-enhanced hydrophilic wettability.
No takes yet. Share an insight, caveat, or question.
Dong et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: