Answers are grounded in this paper and cite their sources.
Epoxy asphalt (EA) binders are widely used in steel bridge deck pavements because of their high strength and durability. However, their performance deterioration under salt-containing wet-dry conditions, and the differences between chloride and sulfate exposure, remain insufficiently understood. In this study, the deterioration of an EA binder was investigated under wet-dry cycles in pure water, 10 wt% NaCl, and 10 wt% Na2SO4 for up to 16 days. Each cycle comprised immersion at 60 °C for 16 h followed by drying at 60 °C for 8 h. Tensile testing, Shore A hardness measurements, and dynamic mechanical analysis (DMA) were conducted to characterize changes in mechanical properties and temperature-dependent viscoelastic behavior. The results show that after 16 days, tensile strength decreased by 49–56% and elongation at break by 71–78% across the three media. Shore A hardness also declined, with Na2SO4 producing the lowest final value. DMA revealed reductions in storage modulus and glass transition temperature (Tg). The greatest modulus loss at both 25 and 60 °C occurred in the Na2SO4 group, although the temporal deterioration patterns differed between the two temperatures. Tg decreased by 5.26 °C in pure water and by approximately 8.7 °C in both salt solutions. These findings indicate that salt-related deterioration depends on the measured property and test temperature rather than following a single severity ranking. The combined mechanical and viscoelastic results provide a comparative basis for evaluating EA durability under repeated wet-dry salt exposure.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: