Answers are grounded in this paper and cite their sources.
Oil retention and heat removal in an under-race-lubricated double-row tapered roller bearing were investigated using oil–air volume-of-fluid (VOF) calculations. Transient tilting flows and steady conjugate heat transfer were analyzed separately. The thermal model applies prescribed equivalent surface heat fluxes from semi-empirical friction torque, with constant oil viscosity and no local elastohydrodynamic shear heating or thermal–viscosity feedback. The late-time cavity oil fraction fell from 0.1360 to 0.0425 as bearing speed increased from 1000 to 4000 r/min. At 2000 r/min and 0.10 s, it rose from 0.0774 to 0.1516 as the jet speed increased from 10 to 30 m/s. Port count and total flow varied together in the one- and eight-port runs. Higher jet speed lowered maximum solid temperature within each steady diameter group. At d = 1.2 mm and v = 10 m/s, the solid peak rose across the 2000, 3000 and 4000 r/min cases under fixed heat input. The archived peak fell to 311.53 K at 5000 r/min.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: