Answers are grounded in this paper and cite their sources.
La-doped CeO2 (LDC) coatings are promising thermal barrier coating candidates for nickel-based superalloys, but systematic studies on their thermal shock resistance, particularly for coatings fabricated by electron beam physical vapor deposition (EB-PVD), remain limited. In this work, LDC coatings with different La doping levels (0, 20%, and 40 at.%) were deposited onto a nickel-based alloy substrate by EB-PVD, and their thermal shock resistance was evaluated by thermal cycling between room temperature and 1000 °C. All coatings survived 480 cycles without spallation, and the 40% LDC coating exhibited the least surface damage and the best thermal shock resistance. The growth of the thermally grown oxide (TGO) layer followed two-stage parabolic kinetics before and after microcrack initiation. The surface hardness of the doped coatings increased rapidly during the first 10 cycles, remained stable between 10 and 120 cycles, and then increased again after 120 cycles, whereas that of pure CeO2 decreased after 60 cycles. The cracking mechanisms were governed by residual stress, coating densification, and TGO growth. Atomic diffusion promoted crack healing, but the healing effect was strongly limited by crack width: once the crack width exceeded a critical value, the diffusion distance became kinetically prohibitive, resulting in only marginal morphological changes at the crack edges rather than complete healing.
No takes yet. Share an insight, caveat, or question.
Huang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: