Answers are grounded in this paper and cite their sources.
Mining tailings are the by-products of ore extraction and beneficiation and are generally well-graded materials whose particles are more angular than natural soils. These characteristics affect the compression and breakage during the construction of Tailings Storage Facilities (TSF). This paper investigates iron ore tailings with varying fines content subjected to isotropic compression tests up to very high pressures in order to evaluate their behavior along the Normal Compression Line (NCL). Particle breakage was assessed through sieving and hydrometer test, while morphological characteristics were measured using Digital Image Analysis (DIA), both conducted before and after the tests. Results were compared with data from silica sands available in the literature. The tailings presented reduced particle breakage during compression when compared to uniform sands and slow convergence of compression paths in the v–p′ plane. Moreover, whereas the particles of uniform sand become less spherical, less convex, and have a lower aspect ratio after compression to higher pressures, tailings particles tend to become more spherical, more convex, and have a higher aspect ratio. The limited particle breakage observed in tailings is explained by prior mechanical crushing during mineral processing, which already brings their particle size distribution close to a fractal condition.
No takes yet. Share an insight, caveat, or question.
Wagner et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: