Answers are grounded in this paper and cite their sources.
Rapid development of fifth‐generation communication systems and Internet‐of‐Things (IoT) platforms requires materials that are lightweight, flexible, environmentally stable, scalable, and have a high electromagnetic interference (EMI) shielding efficiency. In order to enhance dielectric and EMI shielding performance, a magnetically active polymer nanocomposite was developed by incorporating iron borate (Fe 3 BO 6 ) nanoparticles into a poly(vinylidene fluoride) (PVDF) matrix. Here, Fe 3 BO 6 nanoparticles were synthesized by a citric acid‐assisted sol–gel technique and uniformly dispersed in the PVDF matrix via the solution casting method. A clear percolation threshold occurs at 12 wt% Fe 3 BO 6 content, where conductivity increases by nearly seven orders of magnitude and the composite achieves an ultrahigh dielectric permittivity of ~1.38 × 10 5 at 1 Hz for a 0.9 mm thick film. Above this threshold, total shielding effectiveness reaches ~25 dB, satisfying practical application requirements. The increased shielding comes from the synergistic conductive networks, magnetic losses, and strong interfacial polarization at the PVDF‐Fe 3 BO 6 interfaces, which contribute to effective electromagnetic attenuation. The composites show excellent environmental stability, with negligible variations in permittivity and conductivity values after 1 year of storage. In addition, mechanical bending increases permittivity owing to a stress‐induced α → β phase transition in PVDF, which enhances the dipolar alignment and interfacial polarization. These findings demonstrate that PVDF/Fe 3 BO 6 nanocomposites are highly promising candidates for EMI shielding.
No takes yet. Share an insight, caveat, or question.
Suresh et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: