Answers are grounded in this paper and cite their sources.
Crystallization in polyhydroxyalkanoate (PHA)-based blends, influenced by the thermal history and shear field, governs the resulting cellular and interfacial morphology of foamed blends. Here, PHA/polycaprolactone (PCL) and PHA/poly(butylene succinate) (PBS) foams were prepared by extrusion to examine the roles of melt memory, viscoelasticity, and shear. The crystallization temperature of PHA was shifted from 115 °C after complete melting at 180 °C to 153 °C when melting was restricted to 170 °C due to the retention of residual crystalline nuclei. Such an induced crystallization maximized the crystalline lamellar thickness to 5.0 nm, compared with 4.7 nm at 160 and 180 °C, and resulted in a stiffer, more strain-resistant melt at strains up to 10–15%. This nanoscale crystalline reorganization, compounded by increasing shear rate from 130 to 250 s–1, refined the cellular structure of both blends with divergent shear-dependent minor phase morphologies. PCL discrete particles (1–6 μm) acted as heterogeneous nucleation sites without considerable interfacial debonding, whereas PBS underwent complete in situ fibrillation into an entangled nanofibrillar network (∼600–850 nm fiber diameter) that densified continuously with shear rate. PHA/PBS foam reached a void fraction of ∼32% at 250 s–1, roughly 2 times that of PHA/PCL. The contrasting morphologies, particle-mediated nucleation for PCL versus in situ nanofibrillation for PBS, demonstrated that the minor phase provides an independent effect, alongside melt memory-controlled crystallization and shear rate, for reinforcing the microstructure of PHA-based foams.
No takes yet. Share an insight, caveat, or question.
Ramin Hosseinnezhad (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: