Answers are grounded in this paper and cite their sources.
Purpose The purpose of the present work is to examine the effects of sensitization on the metallurgical characteristics of deformed High Mn austenitic steel using grain boundary engineering. Design/methodology/approach The Electron Backscatter Diffraction technique, and scanning electron microscopy have all been used to demonstrate the microstructural examination. The degree of sensitization (DOS) was examined using the double-loop electrochemical potentiokinetic reactivation test. Findings The findings shown that during deformation, fine recoverable grains of strain-induced martensite (SIM) and austenite combined formed on the surface of High Mn Austenitic steel. The DOS of the CW samples is significantly higher than that of the as-received sample due to the production of SIM. The reversion of SIM and fine reverted austenite grains abolished the sensitization of the High Mn austenitic steel sample that had been subjected to CW after it had been TA at 900 °C-6 h. Because of this austenite grain refinement, the Cr-depletion zone healed more quickly due to a greater diffusion rate of Cr at higher temperatures and CW. Originality/value This study demonstrates the significant influence of thermomechanical processing on the sensitization behavior of high-Mn austenitic steel. The combined effect of 50% cold work and then thermal aging at 900 °C for 6 h produced refined reversed austenite and SIM, leading to improved resistance to sensitization and enhanced mechanical properties. The results provide insight into the correlation between grain refinement, martensitic transformation and intergranular corrosion behavior in high-Mn austenitic steel.
No takes yet. Share an insight, caveat, or question.
Shukla et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: