Answers are grounded in this paper and cite their sources.
Draft gear is one of the main sources of nonlinearity in longitudinal train dynamics (LTD), and its accurate modelling is essential to obtain reliable predictions of the in-train forces. This need is particularly relevant for the new Digital Automatic Coupler (DAC), the coupling system proposed for future European freight railways, whose draft gear relies on polymer elements. This work compares six modelling strategies for the polymer draft gear of a DAC, ranging from a simple linear-viscous formulation to nonlinear stroke- and velocity-dependent damping laws, a rheological model and a two-curve elastic model. All formulations are calibrated against the same experimental campaign carried out on a dedicated test bench. The characterisation comprises quasi-static ramps and dynamic sinusoidal tests, spanning a representative range of strokes and loading rates found in operating conditions of freight trains. Each model’s parameters are obtained via a two-stage fitting procedure, where the parameter domain is first explored with a genetic algorithm and the results are refined via a gradient-based method. The reconstructed models’ performance is assessed in terms of the absorbed energy per cycle and of the peak-force error, complemented by a qualitative comparison of the force–displacement loops of both experimental data and model output. The results show that the quality of the reconstruction is strongly governed by the choice of the damping model: most formulations reproduce the high-amplitude ramps accurately but fail to capture the increase in dynamic stiffness observed in the sinusoidal tests, as well as their general shape. The two-curve model provides the best reproduction of the force envelope, while the rheological model best captures the rate-dependent behaviour.
No takes yet. Share an insight, caveat, or question.
Lanzillo et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: