Answers are grounded in this paper and cite their sources.
This study quantitatively investigates the effects of wall finish material on hygroscopic inertia and Precision Climate Control System (PCCS) air-conditioning loads in museum storage through full-scale experiments under Seoul's humid continental climate with dry winters. Paulownia Wood Board (PWB) and Humidity Regulating Panel (HRP) were compared. This study directly compares the hygrothermal performance of full-scale storage rooms under both excessively high and low initial humidity, with air-conditioning loads calculated from temperature, humidity ratio, and enthalpy. HRP's higher moisture buffering capacity substantially slowed indoor humidity transitions relative to PWB (5988 vs. 426 min from 80% to 70% RH; 3952 vs. 195 min from 30% to 50% RH). HRP-finished storage remained largely decoupled from outdoor humidity fluctuations, with lower Pearson correlation coefficients (−0.3691 to 0.4002 vs. 0.5094 to 0.6213 for PWB) and lower slope coefficients from Newey–West HAC regression (β 1 : −0.2377 to 0.1790 vs. 0.3650 to 0.3875 for PWB), indicating tighter synchronization of PWB with outdoor humidity. This buffering produced condition-dependent loads: under high initial humidity, HRP-finished storage incurred 33% higher cooling and 89% higher dehumidification loads than PWB, whereas under low initial humidity its loads were 22% and 54% lower, respectively. The same trends persisted when outdoor sensible heat was isolated under steady-state, infiltration-free conditions. Thus, the effect of HRP's hygroscopic inertia on air-conditioning load depends on the initial humidity state and the direction of the disturbance relative to the PCCS setpoint. Nevertheless, HRP consistently sustained the conditioned indoor state within the target dead band for longer, which can reduce the frequency of duty-cycle activation and mitigate abrupt PCCS load spikes.
No takes yet. Share an insight, caveat, or question.
Choi et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: