Answers are grounded in this paper and cite their sources.
The growing power density of modern electronic devices has intensified cooling requirements, underscoring the need for advanced liquid-cooling solutions. A recently proposed “pump-cooler” design exploits the high-speed impeller rotation to achieve unsteady rotational turbulent flow over the heat sink and significantly enhances heat convection. To fully explore its thermal potential, this study investigates the synergistic thermal performance of ribbed heat sink configurations under pump-cooler flow patterns. Three configurations with 2, 4, and 8 curved radial ribs attached to a 42-mm-diameter circular heat sink are numerically and experimentally examined at a water flow rate of 400 mL/min and an impeller rotational speed of 2000 RPM. The results reveal that the heat transfer augmentation primarily stems from the synergy between the impeller-induced periodic rotary mainstream and the rib-induced near-wall vortices. The unsteady mainstream excites dynamic vortex evolution, suppressing the formation of thermal dead zones. In return, the secondary vortices respond more effectively to the mainstream unsteadiness than the viscous boundary layer, amplifying the disturbance in the temperature field. Furthermore, by promoting turbulence generation from viscous shear to flow mixing, the pump impeller and the surface ribs collectively enhance the intensity of turbulent convection. Experimental measurements, which show a progressive reduction in overall thermal resistance with increasing rib count, validate the thermal performance improvement predicted by the numerical simulations. The 8-rib configuration achieves a thermal resistance 22 % lower than the flat baseline, demonstrating the potential of the proposed surface modification strategy for the pump-cooler system.
No takes yet. Share an insight, caveat, or question.
Fan et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: